DBUG> DataCAD: CNC Sunflower Grille

[SDESIGNA@aol.com]

<<In a message dated 5/7/2008 9:48:15 P.M. Mountain Daylight  Time, 
mike.smith208@verizon.net writes:
Looks beautiful! Do you have to do the thing in 3D, or 2D for  CNC? If in =
3D, does it have to be created with the actual material  thickness? Is =
there anything special you have to do before sending it to  a CNC =
machine?



Metalwork is VERY cool but remember too that Waterjet/CNC machines can be  
used on many other materials like Stone & Glass - See the 1st image on the  
Hospitality Section of our website - The floor is 7 different types of sandstone 
cut to pay homage' to the "sun" (god) - All done in Datacad and Emailed to the 
 Fabricator. We did produce the (2D) drawings 1:1 but, that's how we draw  
anyway. FWIW 



David K. Sargert, LEED, AP
104  Kristine Selph Rd
PO Box 230
Ranchos de Taos, NM   87557
____________________________
david@sargertdesign.com
www.sargertdesign.com
505-573-9518
                   *******************************
 To Access DataCAD Web Links, Go To: http://world.std.com/~eshu/links.htm
 New Posts-> datacad-dbug@world.std.com OR http://tinyurl.com/4ywef