DBUG> Papersize units change

[Christopher Glass <glassc@ime.net>]

I've had the same problem consistently with the Papersize macro, to the
point that I now expect it. You can verify before you print that the change
has occurred by doing a screen redraw -- the dimensions change to inches,
and settings can be used to change them back and then print through PPP as
usual -- as long as you don't use Papersize to change anything else before
you print!

Chris Glass
 
Date: Mon, 20 Jul 1998 11:25:44 -0700
From: Randy Hopkins <rhassoc@jps.net>
Subject: Re: DBUG> Dimensions Printing Inches Only


I just ran accross this problem a few days ago.  In my case I decided to
try
associative dimensioning because of the talk on this forum.  When I plot, I
use 
the papersize macro which converts the units to inches. (as noted inn the 
previous topic of drawings mysteriously changing units.)  So when I looked
at my 
drawing on the screen it was fine, I would plot and then exit out of
papersize 
and the drawing was still correct, but the plot was in inches.

                   *******************************
 For DataCAD Links, FAQs, Tutorials/info- http://world.std.com/~eshu/links.htm
 Postings -> datacad-dbug@world.std.com - Subscription help: eshu@world.std.com